Configuration
11
NXB-KNX KNX Communications Gateway
Select
Port Settings
from the Admin drop-down menu to open the
Port Settings
page (FIG. 15). Use the options on the
page to specify various Port settings for this NXB-KNX unit.
The options on this page provide inputs for enabling and disabling of HTTP, HTTPS, Telnet, SSH and FTP ports, and
allow you to change each port number from its standard default assignment.
Clock Manager
Hover the cursor over the
Clock Manager
option in the Admin menu to open the Clock Manager sub-menu (FIG. 16).
FIG. 15
Port Settings page
Restore Factory Defaults:
Click to restore all Port settings to the factory defaults.
HTTP Port Number:
• Default = enabled
• Default port number =
80
HTTPS Port Number:
• Default = enabled
• Default port number =
443
Telnet Port Number:
• Default = enabled
• Default port number =
23
SSH Port Number:
• Default = enabled
• Default port number =
22
FTP Port Number:
• Default = enabled
• Default port number =
21
Reboot:
• Click to initiate a system reboot.
• Port changes only take effect after a reboot.
Содержание NXB-KNX
