Cross-Line Communication
38
NXB-KNX KNX Communications Gateway
4.
Verify that
NXB-KNX
is selected, and click
Import
.
Adding the Virtual Device to the ETS3 Project
Once the import procedure is complete, the virtual device must be added to the ETS3 project:
1.
Identify the appropriate
Area
and
Line
at which the physical NXB-KNX will be connected, and
right-click on the Line name (heading) to access the context menu (FIG. 25):
2.
Select
Add Devices
to invoke the
Product Finder
dialog (FIG. 26):
FIG. 24
Selective Import dialog
FIG. 25
ETS3 - Topology in Default Project - context menu
FIG. 26
Product Finder dialog
Содержание NXB-KNX
