![background image](http://html.mh-extra.com/html/amx/ncite-813/ncite-813_instruction-manual_2938703118.webp)
118
Instruction Manual - Incite Digital Video Presentation Systems
Programming
Audio SEND_COMMANDs (Cont.)
?AUDMIC_LIMITER_RELEASE
Requests the duration of the release phase while limiting from the microphone port addressed by
the D:P:S.
Syntax:
SEND_COMMAND <DEV>, “’?AUDMIC_LIMITER_RELEASE’”
Example:
SEND_COMMAND MIC_1, “’?AUDMIC_LIMITER_RELEASE’”
Returns a string of the form:
AUDMIC_LIMITER_ RELEASE=<release>
AUDMIC_LIMITER_RELEASE
Sets the duration of the release phase while limiting for the microphone port addressed by the
D:P:S.
Syntax:
SEND_COMMAND <DEV>, “’AUDMIC_LIMITER_RELEASE-<release>’”
Variable:
release = 10 to 5000
Example:
SEND_COMMAND MICROPHONE_1, “’AUDMIC_LIMITER_RELEASE-200’”
Sets the limiter release for the microphone port (#1 based on the D:P:S) to 200.
?AUDMIC_LIMITER_THRESH
Requests the duration of the threshold phase while limiting from the microphone port addressed by
the D:P:S.
Syntax:
SEND_COMMAND <DEV>, “’?AUDMIC_LIMITER_THRESH’”
Example:
SEND_COMMAND MIC_1, “’?AUDMIC_LIMITER_THRESH’”
Returns a string of the form:
AUDMIC_LIMITER_ THRESH=< thresh>
AUDMIC_LIMITER_THRESH
Sets the threshold while limiting from the microphone for addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, “’AUDMIC_LIMITER_THRESH-<thresh>’”
Variable:
thresh = 0 to -60
Example:
SEND_COMMAND MICROPHONE_1, “’AUDMIC_LIMITER_THRESH--20’”
Sets the limiter threshold for the microphone port (#1 based on the D:P:S) to -20.
?AUDMIC_ON
Requests the status of the microphone port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, “’?AUDMIC_ON’”
Example:
SEND_COMMAND MICROPHONE_1, “’?AUDMIC_ON’”
Returns a COMMAND string of the form:
AUDMIC_ON-<setting>
AUDMIC_ON
Enables or disables the microphone port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, “’AUDMIC_ON-<setting>’”
Variable:
setting = on, off
Example:
SEND_COMMAND MICROPHONE_1, “’AUDMIC_ON-off’”
Disables the microphone port (#1 based on the D:P:S).
?AUDMIC_PHANTOM_PWR
Requests the setting for phantom power for a microphone.
Syntax:
SEND_COMMAND <DEV>, “’?AUDMIC_PHANTOM_PWR’”
Example:
SEND_COMMAND MICROPHONE_1, “’?AUDMIC_PHANTOM_PWR’”
Returns a COMMAND string of the form:
AUDMIC_PHANTOM_PWR-<result>
AUDMIC_PHANTOM_PWR
Enables or disables phantom power for the microphone port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, “’AUDMIC_PHANTOM_PWR-<setting>’”
Variable:
setting = on, off
Example:
SEND_COMMAND MICROPHONE_1, “’AUDMIC_PHANTOM_PWR-on’”
Allows phantom power for the microphone port (#1 based on D:P:S).