![background image](http://html.mh-extra.com/html/amx/ncite-813/ncite-813_instruction-manual_2938703020.webp)
20
Instruction Manual - Incite Digital Video Presentation Systems
Incite Digital Video Presentation Systems
NCITE-813AC Specifications (Cont.)
Onboard Master:
Controller:
Integrated Controller is the equivalent of a NetLinx NX-2200 Integrated Controller
Memory:
•NVRAM: 1 MB
•Memory Card: 16 GB SD
•DDRAM: 1 GB
NOTE:
Supports external USB Solid State Drive
Processor:
1600 MIPS
Program Port:
(1) USB Standard B
Configuration Dip Switch: 4-Position
ID Pushbutton:
Black ID pushbutton for setting IP mode and reverting to default configuration and firmware It has no effect on the
Internal Switcher Device.
Status Indicator:
Status LED (green) blinks to indicate that the system is programmed and communicating properly
Input Indicator:
Input LED (yellow) blinks to indicate that the Controller is receiving data
Output Indicator:
Output LED (red) blinks to indicate that the Controller is transmitting data
USB Host Port:
(2) USB Standard A, one on front and one on back, USB Host port supports Solid State drive for upgrading firmware, loading
code files, copying configuration data and remote storage
Control Parts and Indicators:
AxLink Port (1):
(1) 4-position 3.5mm Screw Terminal, provides data and power to external AxLink control devices
AxLink Indicator:
(1) AxLink LED (green) indicates the state of the AxLink port
RS-232/422/485 Port:
• (1) 10-position 3.5mm Screw Terminal
•NetLinx Port 1
• XON/XOFF (transmit on / transmit off)
• CTS/RTS (clear to send/ready to send)
• 300 - 115,200 baud
RS-232 Port:
• (3) 5-position 3.5mm Screw Terminal
•NetLinx Ports 2-4
• XON/XOFF (transmit on / transmit off)
• CTS/RTS (clear to send/ready to send)
• 300 - 115,200 baud
Serial Indicator:
(4) sets of LEDs (red/yellow) indicate when serial Ports 1-4 are transmitting and receiving data
IR/Serial:
• (4) 2-position 3.5mm Screw Terminal
• 4 IR Transmit / 1-way Serial ports
•NetLinx Ports 11-14
• Support high-frequency carriers up to 1.142 MHz
• 4 IR/Serial data signals can be generated simultaneously
IR/Serial Indicators:
(4) LEDs (red) indicate when each of the IR/Serial ports (11-14) are transmitting control data
I/O Channels:
• (4) One 6-position 3.5mm Screw Terminal
• 4-channel binary I/O port for contact closure with each
• input being capable of voltage sensing
•NetLinx Port 22
• Channels 1-4
I/O Indicator:
(4) LEDs (yellow) indicate each of the I/O channels (1-4) are active
Relays:
• (4) One 2-position 3.5 mm Screw Terminal, (4) singlepole, single-throw relays
•NetLinx Port 21
• Channels 1-4
• Each relay can switch up to 24 VDC or 28 VAC @ 1 A
• Each relay is independently controlled
Relays Indicators:
(4) LEDs (red) indicate when each of the relay channels (1-4) are active (closed)
Integrated Matrix Switcher Control:
Source Select Buttons
1-8:
Press to select audio and video source selection.
Navigation Control (Up,
Down, Left, Right, Select):
For on-screen menu navigation and selection
Menu On/Off:
For entering or exiting on-screen menu mode