manualshive.com logo in svg

AMX Modero ViewPoint MVP-7500, Руководство по эксплуатации/справочник, Страница: 95 / 210

Поделиться
Скачать
AMX Modero ViewPoint MVP-7500 Скачать руководство пользователя страница 95

Setup Pages

85

MVP Modero ViewPoint Touch Panels

Setting the image cache

In the 

Protected Setup

 page:

1.

Press the 

Cache

 button in the 

Protected Setup Navigation Buttons

 section. This opens the 

Cache 

Settings/Cache Setup 

page.

2.

Set the cache expiration in the field 

Flash/RAM Cache Expires

. The Up and Down arrows increment 

through the available time frames.

3.

Press the 

Enable

 button to turn on image caching. The button appears illuminated when enabled.

Select the Up and Down arrows for the field 

Flash Cache Size

 to increase or reduce the amount of Flash 

memory used; the maximum amount of flash that can be allocated for caching is 75% of available flash. 

Clearing the image cache

In the 

Protected Setup

 page:

1.

Press the 

Cache

 button in the 

Protected Setup Navigation Buttons

 section. This opens the 

Cache 

Settings/Cache Setup 

page.

2.

Press 

Clear Cache

. This clears all image cache currently stored on the panel (both Flash and 

RAM).

Checking image cache status

In the 

Protected Setup

 page:

Press the 

Cache

 button in the 

Protected Setup Navigation Buttons

 section. This opens the 

Cache 

Settings/Cache Setup 

page. All status information is located in the 

Image Cache Status 

section of the 

page.

Cache Settings/Cache Setup Page Elements (Cont.)

RAM Hit Rate

The percentage of image requests (static and dynamic) satisfied by accessing 
the cache.
100 * (# of cache hits) / (# of cache hits + # of cache misses)
 # of cache hits - the number of times an image was requested that the image 
was found in the cache. If your hit rate is low, you may want to consider 
enabling Flash cache.
 # of cache misses - the number of times an image was requested that the 
image could not be found in the cache, and the image had to either be loaded 
from flash or obtained via the network (for dynamic images). It is considered a 
RAM Cache Miss even if the image is subsequently found in flash cache.

Items in Cache (RAM)

The number of images that are currently stored in the RAM cache.

Flash Current Size

The maximum flash space allocated for image caching. Flash space is used for 
caching only when there is not enough available memory in the RAM cache for 
a newly requested image (it is used only for dynamic images).

Flash Hit Rate

The percentage of image requests (dynamic only) that are satisfied by 
accessing the flash cache.
100 * (# of flash cache hits) / (# of flash cache hits + # of flash cache misses)
 # of flash cache hits - # of times a dynamic image could not be found in RAM 
cache but was found in flash cache
 # of flash cache misses - # of times a dynamic image could not be found in 
either RAM or flash cache. RAM cache hits are not relevant in this calculation.

Items in Cache (Flash)

The number of images that are currently stored in the Flash cache.

Содержание Modero ViewPoint MVP-7500



















































































































































































































Отзывы:

Нет отзывов