manualshive.com logo in svg

AMX Modero ViewPoint MVP-7500, Руководство по эксплуатации/справочник, Страница: 69 / 210

Поделиться
Скачать
AMX Modero ViewPoint MVP-7500 Скачать руководство пользователя страница 69

Setup Pages

59

MVP Modero ViewPoint Touch Panels

The elements of this page include:       

Refer to the 

Step 3: Choose a Master Connection Mode 

section on page 31 for more detailed information 

on using the System Settings page.

System Settings Page Elements 

Back:

Saves all changes and returns to the previous page.

Connection Status icon:

The icon in the upper-right corner of each Setup page shows online/offline state 
of the panel to the master.
• Bright red - disconnected
• Bright green - connected. Blinks when a blink message is received to dark 

green every 5 seconds for half a second then go back to bright green.

• Bright yellow - panel missed a blink message from the master. It will remain 

yellow for 3 missed blink messages and then turn red. It will return to green 
when a blink message is received.

Note

: a Lock appears on the icon if the panel is connected to a secured NetLinx 

Master.

Master Connection:

Sets the NetLinx Master communication values:

Type

Sets the NetLinx Master to communicate with the panel via either USB or 
Ethernet. This is based on the cable connection from the rear. 

Note

: ICSNet is not a supported option on this panel.

•

Ethernet

 is a CAT-5 cable (10/100Base T terminated in an RJ-45 connector) 

used to network computers together and is used in most LAN (local area 
networks). This description is also used to refer to both wired and wireless 
communication.

•

USB

 option cannot be used on Modero panels which are not equipped with a 

rear USB port.

Master Connection (Cont.):

Mode

Cycles between the connection modes: URL, Listen, and Auto.

(Ethernet Only - disabled when USB is selected)

•

URL

 - In this mode, enter the IP/URL, Master Port Number, and username/

password (if used) on the Master. The System Number field is read-only - the 
panel obtains this information from the Master.

•

Listen

 - In this mode, add the panel address into the URL List in NetLinx 

Studio and set the connection mode to Listen. This mode allows the Modero 
touch panel to “listen” for the Master’s communication signals. The System 
Number and Master IP/URL fields are read-only.

•

Auto

 - In this mode, enter the System Number and a username/password (if 

applicable). Use this mode when both the panel and the NetLinx Master are 
on the same Subnet, and the Master has its UDP feature enabled. The 
Master IP/URL field is read-only.

System Number

Allows you to enter a system number. Default value is 0 (zero). 

(ETHERNET Only - disabled when USB is selected)

Master IP/URL

Sets the Master IP or URL of the NetLinx Master. 

(ETHERNET Only - disabled when USB is selected)

Master Port Number

Allows you to enter the port number used with the NetLinx Master. 
• Default = 1319

(ETHERNET Only - disabled when USB is selected)

Username/Password

If the target Master has been previously secured, enter the alpha-numeric string 
(into each field) assigned to a pre-configured user profile on the Master. This 
profile should have the pre-defined level of access/configuration rights.

Содержание Modero ViewPoint MVP-7500



















































































































































































































Отзывы:

Нет отзывов