manualshive.com logo in svg

AMX Modero ViewPoint MVP-7500, Руководство по эксплуатации/справочник, Страница: 94 / 210

Поделиться
Скачать
AMX Modero ViewPoint MVP-7500 Скачать руководство пользователя страница 94

Setup Pages

84

MVP Modero ViewPoint Touch Panels

The elements of this page include:       

FIG. 63  

Cache Setup Page (MVP-8400)

Cache Settings/Cache Setup Page Elements

Back:

Saves all changes and returns to the previous page.

Connection Status icon:

The icon in the upper-right corner of each Setup page shows online/offline state 
of the panel to the master.
• Bright red - disconnected
• Bright green - connected. Blinks when a blink message is received to dark 

green every 5 seconds for half a second then go back to bright green.

• Bright yellow - panel missed a blink message from the master. It will remain 

yellow for 3 missed blink messages and then turn red. It will return to green 
when a blink message is received.

Note

: A Lock appears on the icon if the panel is connected to a secured 

NetLinx Master.

Image Cache Settings:

Allocates Flash memory for image caching.

Flash Cache Size

Press the Up and Down arrows to add and remove memory. Flash memory 
allocation cannot exceed the amount of Flash memory on the panel.

Flash/RAM Cache Expires

Press the Up and Down arrows to change the amount of time the images stay 
in cache memory. The options are:
• Never
• 2 Hours
• 8 Hours
• 1  Day
• 2  Days
• 5  Days

Enable:

Press this button to toggle the image Flash cache option On and Off.

Clear Cache:

Press this button to clear both the Flash and RAM cache of all stored images.

Image Cache Status:

The status of the memory available versus in use.

RAM Max Size

The maximum amount of memory available for all image caching.

RAM Current Size

The memory that is currently in use for caching static and dynamic images.

Содержание Modero ViewPoint MVP-7500



















































































































































































































Отзывы:

Нет отзывов