Mio Modero® R-4 Remote
8
Mio Modero R-4 Remote - Instruction Manual
Mio Modero
®
R-4 Remote
Overview
The Mio Modero
®
R-4 remote provides custom control features, contained in an elegant hand-held rechargeable device(FIG. 1). The
Mio R-4 communicates with a NetLinx master via a wireless ZigBee network: the device comes with installed firmware for
connecting to a ZigBee Pro 2007 network, but it can be updated with firmware to allow it to connect to older ZigBee 2004
networks.
Selecting a source device sends a command to the master and runs predetermined events associated with that source. Selecting a
macro will run predefined events, which might not be associated with sources listed, then return the device to its previous mode.
You will need TPDesign4 to properly program this device. Both the application and its documentation are available from
www.amx.com
.
Touch And Tilt Sensor
The Mio R-4 wakes up upon touching the chrome side rails, touching the touch screen, or pressing a button. If the remote should
go to sleep when holding it, you can reawaken the device by tilting it. Errant jostling, such as bumping a table on which the device
rests, will not wake the device unless you are holding it.
FIG. 1
The Mio R-4 (front panel)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Numeric Keypad
19
Touch Screen
20
1 - Power
2 - Guide
3 - Exit
4 - Menu
5 - Information
6 - Move Up
7 - Move Down
8 - Move Left
9 - Move Right
10 - Select
11 - Volume Up
12 - Volume Down
13 - Channel Up
14 - Channel Down
15 - Last Viewed
16 - Mute
17 - Input
18 - Enter
19 - Back/Home
20 - Up/Down Touch Screen Navigation