AMX MIO R-4 Скачать руководство пользователя страница 26

Страница: 26 / 66

Programming the Mio R-4

Mio Modero R-4 Remote - Instruction Manual

Programming the Mio R-4

Overview

Most functionality of the Mio R-4 is handled using the application

TPDesign4

. Go to

www.amx.com

for the supporting

documentation.
The Mio R-4 recognizes a select number of NetLinx Commands. For a full list and descriptions, consult the

SEND_COMMANDs

section on page 29.

NOTE:

Before doing any programming for the Mio R-4, you must download and install the latest AMX USB LAN driver from

www.amx.com. The user will be required to install the driver, put the device in USB mode, and connect the device to the computer

prior to any upload or download.

Using the Programming Jack on the Mio R-4

The programming jack located on the back of the Mio R-4 (FIG. 22) is used for communication between the device and AMX

software. The programming jack uses a CC-USB Programming cable, USB to mini USB (

FG10-5965

), which can be ordered from

AMX. Make sure the device is situated in the charging cradle before starting download of configuration files.

NOTE:

USB file transfers should only be performed while the unit is on the charging cradle and with the sleep timeout set to 0 (off).

Set the sleep timeout (in the Setup Menu,

Remote and Display Settings

Timeout

) to 0 BEFORE attaching the USB cable.

To download Configuration Files
1.

Flip and turn the Mio R-4 device so that the buttons are facing away from you and the device is upside down.

Holding the device in both hands, place your thumbs on the battery door and slide the battery door free.

Place the device in the charging cradle and connect the mini USB programming cable (

FG10-5965

) into the programming jack

on the back side of the remote device.

Connect the other end of the USB cable to the USB port on your computer.

Configure the communication parameters in NetLinx Studio or File Transfer 2 and download the resultant file.

Disconnect the USB cable after the download. The Mio R-4 will self-reboot after the file download.

Downloading Configuration Files through TPDesign4

TPDesign4 may also be used to download configuration files to the Mio R-4. To download files directly from TPDesign4:
1.

Place the device in the charging cradle and connect the mini USB programming cable (

FG10-5965

) into the programming jack

on the back side of the remote device.

Connect the other end of the USB cable to the USB port on your computer.

In TPDesign4, select

Transfer->Connect...

Wait until the connection icon in the Mio R-4 setup pages turns green.

Select

Transfer to device

in TPDesign4.

NOTE:

If the Mio R-4's connection icon does not turn green within 10-15 seconds of enabling the virtual NetLinx master (“Refresh

System” in NetLinx Studio, “Connect...” in TPDesign4), unplug the device for at least 5 seconds and then reconnect it.

Updating Firmware

Main Mio R-4 firmware updates are only available at this time via USB connection to the Virtual NetLinx Master.

Updating Mio R-4 Firmware Through USB

To update the main firmware for the Mio R-4:
1.

Connect the Mio R-4 to your computer via the USB programming jack (FIG. 22).

Open NetLinx Studio.

Connect to the Virtual NetLinx Master.

Select

Tools > Firmware Transfer

FIG. 22

The Mio R-4 Programming Jack

Programming Jack

Содержание MIO R-4



































































Результаты поиска

Содержание MIO R-4

Отзывы:

Похожие инструкции для MIO R-4

Бренды по названию

Популярные бренды

AMX MIO R-4, Инструкция по эксплуатации

Результаты поиска

Содержание MIO R-4

Отзывы:

Похожие инструкции для MIO R-4

Бренды по названию

Популярные бренды