AMX Mio Modero R-4, Руководство по эксплуатации/справочник

Страница: 50 / 103

Programming the Mio R-4
42 Mio Modero R-4
Page Commands (Cont.)
@DPG
Delete a popup
page from a group
Delete a specific popup page from a specified popup group if it exists.
Syntax:
SEND_COMMAND <DEV>,"'@DPG-<popup page name>;<popup group name>'"
Variables:
• popup page name = 1 - 50 ASCII characters. Name of the popup page.
• popup group name = 1 - 50 ASCII characters. Name of the popup group.
Example:
SEND_COMMAND Device,"'@DPG-Popup1;Group1'"
Deletes the popup page 'Popup1' from the popup group 'Group1'.
@PDR
Set the popup
location reset flag
Set the popup location reset flag. If the flag is set, the popup will return to its default loca-
tion on show instead of its last drag location.
Syntax:
SEND_COMMAND <DEV>,"'@PDR-<popup page name>;<reset flag>'"
Variables:
• popup page name = 1 - 50 ASCII characters. Name of the page the
• popup is displayed On.
• reset flag = 1 = Enable reset flag
0 = Disable reset flag
Example:
SEND_COMMAND Device,"'@PDR-Popup1'"
Popup1 will return to its default location when turned On.
@PHE
Set the hide effect
for a popup page
Set the hide effect for the specified popup page to the named hide effect.
Syntax:
SEND_COMMAND <DEV>,"'@PHE-<popup page name>;<hide effect name>'"
Variables:
• popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed
On.
• hide effect name = Refers to the popup effect names being used.
Example:
SEND_COMMAND Panel,"'@PHE-Popup1;Slide Left'"
Sets the Popup1 hide effect name to 'Slide Left'.
@PHP
Set the hide effect
position
Set the hide effect position. Only 1 coordinate is ever needed for an effect, however the
command will specify both. This command sets the location at which the effect will end at.
Syntax:
SEND_COMMAND <DEV>,"'@PHP-<popup page name>;<x coordinate>,<y
coordinate>'"
Variable:
• popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed
On.
Example:
SEND_COMMAND Device,"'@PHP-Popup1;75,0'"
Sets the Popup1 hide effect x-coordinate value to 75 and the y-coordinate value to 0.