AMX IREdit, Руководство по эксплуатации/справочник

Страница: 50 / 58

Communications and File Transfers
44 IREdit IR Library Management
4.
Confirm the connection information in the Device field, and enter the Device, Port and System number.
5.
Click Next to request the IR data from the targeted device (FIG. 63):
6.
Click Next when the wizard reads File transfer complete.
7.
Enter the name of the Manufacturer or select from the list and click
Next
.
8.
Enter the name of the Category or select from the list and click Next .
9.
Enter the name of the Hand Control Model and click
Next
.
10.
Enter the name of the Model and click Next .
11.
Confirm all information listed on the
Finished
screen
12.
Click Finish .
Get Available Memory
When sending an IR file to a master you can first check the available memory of that port via the Get Available
Memory
function:
1.
Select Tools > Send...
2.
In the
Send IR
dialog, select
Get Available Memory
.
3.
If the port is functioning properly you will receive an amount of available memory.

NI-series devices (NI-2000, NI-3000, NI-4000) always return the value 32768 in response to a "Get
Available Memory" request, regardless of the port queried.
FIG. 63 Receive IR Wizard - Transferring IR Data dialog
Place a check next to Please take me to the advanced screen to proceed to the final
screen of the wizard after a successful transfer.
The first 4 ports and the last 4 ports of a NetLinx system share memory. The available
memory reported from the Get Available Memory is a reflection of all 4 ports. All
ports share the same available memory in Axcess.