AMX Enova AVX-400, Руководство по эксплуатации/справочник, Страница: 21 / 50

Wiring and Device Connections
13 AVX-400 Enova Twisted Pair Presentation Switcher Operation/Reference Guide
SPEAKER
The SPEAKER output is capable of delivering 2x10W into 8 ohm amplified variable stereo audio. The output level can
be adjusted by serial or AxLink commands.
LINE OUT
The LINE OUT output provides the mixed program and line input sources at a variable line level output. It is designed
for use with external audio equipment such as induction loop systems, recording devices, or video conferencing systems.
Destination devices require either balanced (differential) or unbalanced (single-ended) connections. FIG. 23 illustrates
options for wiring between output connectors and the destinations.
Composite Output (VIDEO)
The composite output enables you to use a composite cable (RCA Y) to send video to a display device like a projector.
Attach the composite cable to the composite video connector on the rear of the presentation switcher and run the other
end of the cable to the Composite connector (normally yellow) on the display device or to a Composite wall input plate.
If you connect the port to a wall input plate, use an RJ-45 cable to connect the port on the rear of the wall input plate to
one of the source input ports on the front of the switcher.
FIG. 21 SPEAKER output
FIG. 22 LINE OUT output
FIG. 23
Stereo 5-terminal wiring
FIG. 24 Composite output
Balanced wiring
Unbalanced wiring
AVX-400
destination device