manualshive.com logo in svg

AMX Enova AVX-400, Руководство по эксплуатации/справочник, Страница: 10 / 50

Поделиться
Скачать
AMX Enova AVX-400 Скачать руководство пользователя страница 10

Enova AVX-400 Twisted Pair Presentation Switcher

2

 AVX-400 Enova Twisted Pair Presentation Switcher Operation/Reference Guide

Specifications

The following table lists the specifications for the presentation switcher:

AVX-400 Twisted Pair Presentation Switcher Specifications

Power

12VDC, 4.4A supply

See the 

Power Connector

section on page 10 for information about current 

draw.

Audio Amplifier

Stereo 10W per channel with 7-band graphic equalization

Enclosure

Metal with black matte finish

Front Panel Components:

Source Select Button

1 button for toggling through the 4 inputs with each press

Source Select LED Indicators 4 LED indicators which show which source has been selected

Source Inputs (INPUTS 1-4)

4 RJ-45 connectors for source audio and video. Maximum cable distance for 
these ports is 1-50m (3.2'-165').

LINE IN Auxiliary Audio Input

1 3.5mm Phoenix (5-pin) connector for use with external audio equipment 
such as radio microphones and mixers.

AxLink Device DIP Switches

1 set of 8 DIP switches for setting the address of an AxLink device

AxLink Port

1 3.5mm Phoenix (4-pin) connector that provides data to external control 
devices and allows the AVX-400 to be controlled from a Master. A green 
AxLink LED indicates the state of the AxLink port.

Note:

 

The AVX-400 cannot be powered by this port or use the port to power 

other devices.

RS-232 Control Port

1 3.5mm Phoenix (3-pin) connector that provides data to external control 
devices and allows the AVX-400 to be controlled from RS232 controller.

Configuration Port (PROG)

1 type-B USB connector for configuring the switcher via DCS software.

Power Connector

1 3.5mm Phoenix (2-pin) connector

Rear Panel Components:

RS-232 Display Control

1 male DB9 connector used to control a projector or display from the 
AVX-400-SP

Audio Amplifier Output

1 5.0mm Phoenix (4-pin) connector capable of delivering 2x10W into 8 ohm 
variable stereo audio amplifier.

Line Level Audio Output

1 3.5mm Phoenix (5-pin) connector provides the mixed audio at Line Level

Composite Output

1 RCA (Y) connector for connecting to a display device

VGA/RGB Output

1 HD-15 connector for connecting to a display device

Component Output

1 HD-15 connector for connecting to a display device. You can use breakout 
cable CC-HD15M-RCA3M (

FG10-2170-03

) to connect to 3 x RCA Phono 

Sockets.

Operating Environment:

Storage Temperature: -10º C to 70º C (14º F to 158º F)

Operating Temperature: 0º C to 40º C (32º F to 104º F)

Operating Relative Humidity: 5% to 85% non-condensing

Dimensions (HWD):

1.75" (4.45cm) x 9" (22.86cm) x 6" (15.24cm) HWD

Weight:

2.57 lbs (1.17 kg)

Certifications:

FCC Class B, CE, and IEC60950

Included Accessories:

• 2 5-pin 3.5mm Phoenix connectors, for line-in/out

• 1 4-pin 3.5mm Phoenix connector, for AxLink

• 2 2-pin 5 mm Phoenix connectors, for speakers

• 1 RS-232 3-pin 3.5mm Phoenix connector

• PSR.4.4, 13.5 VDC, 4.4 A Power Supply with 3.5 mm Phoenix Connector 

with Retention Screws (

FG423-46

)

• Enova AVX-400 Presentation Switcher Installation Guide (93-1350-01)

• 1 Suppression Ferrite

Содержание Enova AVX-400



















































Отзывы:

Нет отзывов