AMX AXM-CP, Инструкция по эксплуатации, Страница: 115 / 156

Color Passive-Matrix LCD Touch Panels Touch Panel Program Reference 107
Send file
Touch the SEND FILE option to open the decision box shown in Figure 183.
YES NO
DO YOU WANT TO SEND
THE DRAWING LAYOUT
FILE WITH THE SYSTEM
You can send files to a PC using the AXlink connector or RS-232 (DB-9) connector on
the touch panel. The target PC must be running TPDOC before you send the touch
panel drawings. Refer to
TPDOC Instruction Manual for more information.
•
YES Sends the drawing file to the PC and opens the decision box in
Figure 184.
•
NO Cancels the drawing file transfer and opens the decision box in
Figure 184.
YES NO
PRESS YES FOR BUS
TRANSFER. PRESS NO
FOR RS232 (9 PIN D)
•
YES Sends the file to the PC over the AXlink connector on the touch panel,
and opens the decision box in Figure 185.
•
NO Sends the file to the PC over the RS-232 connector on the touch panel,
and opens the decision box in Figure 185.
YES NO
PRESS YES TO START
THE UPLOAD AND NO TO
QUIT
•
YES Sends the touch panel files to the PC. Choose the EXIT button on the
screen to cancel the file transfer and return to the current page.
•
NO Cancels the file transfer and returns to the current page.
Figure 183
Drawing layout decision box
Note
The send file step is not
required if the touch panel is
connected directly to the
AXCESS Control System.
Figure 184
Transfer type decision box
Figure 185
Start the transfer decision box
Note
The PC must be running
TPDOC before you can send a
touch panel file.