AMSAN AM-TC10626LA, Руководство пользователя

Страница: 32 / 43

AM-TC10626LA
31
Fig
.8
Fig
.9
Operation
⚫
This help arm has been designed to facilitate the
operations of tire mounting/demounting. In any case,
this device would make these jobs easier on any type
of wheel.
⚫
All work on the electrical system, including minor operations,
must be carried out by professionally qualified personnel
！
Check that the electrical supply voltage and air supply is the
same as that indicated on the plate of the machine
1 Rim clamping
⚫
As per the instruction on the manual, lose the tire from
its two sides with a shovel and lubricate the tire bead
⚫
Press pedal E, four jaws start to open and make the
jaws open till big enough to clamp the rim, put the tire
on the turntable. As Fig 8
⚫
Lift switch A and cylinder reach its highest position,
pull switch B down to loose rod and let centering cone
going to the middle of the rim, pull up switch B to lock
rod.
⚫
Pull down switch A and let rim down as Fig,9, again
press pedal F to make rim clamped by the four jaws.
NOTE
：
➢
We Suggest clamping rim from outside, not clamping
rim from inside (if locking rim inside, damage or
danger may occur, such as tire falling, rim damaged.)
。
2
Demounting the tire
2.1 Demounting the upper bead
⚫
Refer to tire changer machine manual, pull swing arm
to its working area, release handle G, move pressing
roller D onto the tire bead as Fig.10, lock hand G, pull-
down switch H, loose tire bead ahead of
mount/demount head.
⚫
Insert lever E from top of mount/demount head,
release pressing roller D and move away from its arm,
pull down switch A, let B press down tire bead
reasonably, press lever E and let upper bead goes
onto mount/demount head, depress pedal C to rotate
turntable till upper bead comes out of the rim.