AMS Diffusion
- Rue des Galeries - ZA du Chevalement - 59286 Roost Warendin - FRANCE - Tél. +33 (0)3.27.94.44.44 - Fax. +33 (0)3 27 94 44 45
Email : [email protected] - www.ams-diffusion.com RCS DOUAI A 451 360 382 - CODE APE 4531Z - SIRET 451 360 382 00035 - TVA FR 55 451 360 382
11
4. TECHNICAL ADVICE
5. LEGAL NOTICE
We recommend that you have your equipment installed by a professional. Failure to comply with the
instructions below may result in material damage and/or adversely affect the functioning of the device. It may
also endanger people’s safety. AMS cannot be held liable for failure to comply with these instructions. Video
kits are video systems designed to facilitate or monitor movements of equipment or machine tools.
AMS DIFFUSION cannot be held liable for any use other than that mentioned above. The manufacturer does not
accept any liability for damage caused by:
- Incorrect mounting or connections.
- Mechanical forces and surges that result in damage to the equipment.
- Modifications made to the device without the manufacturer’s explicit authorisation.
- Any use that differs from that set out in this manual.
- Use while driving
Comply with the following instructions when working on electrical components:
- When checking the voltage of electric cables, only use an LED test lamp or a voltmeter. Test lamps with a
luminous element can damage the vehicle’s electronic systems and trigger the airbag.
- Do not use terminal blocks when making connections.
An inadequate electrical connection could lead to a short circuit, resulting in:
- Combustion of the cables
- The airbag being triggered
- Damage to the control unit’s electronic systems
- Failure of the electrical functions (indicators, brake lights, horn, ignition, headlights).
Dispose of packaging via the appropriate recycling streams.
When your device reaches the end of its life, contact your local recycling centre or your specialist reseller for the
relevant waste reprocessing requirements.
Warranty
Online form
contact@
ams-diffusion.com
