AMS Sensit 3 39 VRM, Руководство по эксплуатации и обслуживанию

Страница: 7 / 52

AMS SENSIT 3 GLASS FRONT VRM
L0086, Rev. H
1-1
1.0 INTRODUCTION
Congratulations on the purchase of your new
AMS Sensit 3 39-VRM merchandiser. The VRM
is a versatile, high-capacity vending machine.
The VRM is designed, tested, and built to provide
years of reliable, low-maintenance service in both
indoor and outdoor environments. A fully
insulated cabinet, DEX data capability, and
flexible product configuration are just some of the
many standard features built into every AMS
merchandiser.
1.1 SENSIT 3 SYSTEM
Your merchandiser is equipped with the
Sensit 3 system. The Sensit 3 system is a
patented vend-sensing system that detects when
products fall into the delivery bin. Basically, a
plane of infra-red light beams is created across
the top of the delivery bin, and the Sensit 3
system can detect when any part of the light has
been blocked by a passing product. Using this
technology, the merchandiser “knows” when your
customer gets the product. The Sensit 3 system
has several important benefits:
1.1.1 Guaranteed Delivery
If, after one revolution, the product hangs up
or an opening was missed in loading, the helix
will rotate two additional partial turns to make
sure the product is delivered. No more hitting or
shaking the merchandiser to get products that did
not fall!
1.1.2 Instant Refund
If the customer does not receive a product,
he can receive a full refund by pressing the coin
return, or he can select another product. No
more refund requests!
1.1.3 Automatic Helix Adjustment
With the Sensit 3 system, the helix stops as
soon as the product falls, or when the helix
returns to the home position. Different packages
can be loaded in the same column. No more
double vending!
1.1.4 Additional Benefits:
1. Opening the delivery bin door will not affect the
Sensit 3 system. The sensors are located
above the delivery bin and will not be blocked
by the door. Product that falls while the door is
open will still pass through the beam.
2. Shining a light at the detector will not allow
vandals to receive free product. Any
tampering which changes the precise amount
of light normally received will be treated as a
successful vend, resulting in the vandal losing
his money.
3. Disabling or blocking the sensor will not allow
vandals to receive free product. The Sensit 3
system must be transmitting the normal
amount of light before the merchandiser will
dispense any product.
3. On a humid day opening the door of a cold
merchandiser may cause some condensation
to form inside. The Sensit 3 system will not
allow vending until this fogging clears, normally
within a few minutes of closing the door.
1.2 MODEL IDENTIFICATION
When requesting service, replacement parts
or technical assistance, please refer to the
Vendor Serial Plate (Refer to Figure 1.1). It is
attached inside the door near the upper right
corner of the window and is visible from the
outside. The information contained on this plate
is necessary to determine what parts, kits, or
maintenance should be applied to your specific
model.
Figure 1.1 Vendor Serial Plate
1.2.1 Model Number Breakdown
(Refer to Figure 1.1)
AMS 39 - VRM
Manufacturer Cabinet Width
1.2.2 Serial Numbering System
(Refer to Figure 1.1)
1-0902-0275
Built
Year Month Sequence
Starting January 1, 2009, a new merchandiser
serial number system went into affect as follows:
The first digit identifies where a merchandiser
was manufactured. Those merchandisers built in
the U.S. start with the number
1 . Those
merchandisers built in Mexico start with the
number
2 .
The next two digits identify the year of
manufacture. These numbers are
09 (for 2009)
and so forth.