L0086, Rev. G
AMS SENSIT 3 GLASS FRONT VENDOR
6-6
Press “8” to change the YES to a NO and
again to change it back. Press”#” to save any
change and exit this feature.
6.9 OPTIONS
6.9.1 Message
The user can customize the scrolling
message that is displayed when the
merchandiser is idle. Other words can be
customized by using the CREATE CUSTOM
option in the LANGUAGE menu (Refer to Section
6.9.3).
Write out the desired message first. The
message to be displayed on the scrolling display
can be up to 50 characters, including letters,
numbers, punctuation and spaces. New
messages erase old ones.
Select the message option and the controller
will prompt the user to press “1” to change the
message, or press “#” to exit.
To enter a message, the user should rapidly
tap a particular key to cycle through a list of
characters for that key. Stop at the desired
character. When the keypad is left idle, the last-
displayed character is moved over to the end of
the message. Continue to select the next
character. The key definitions are similar to those
of telephones and cell phones:
KEY 0:
(space)0
KEY 5:
JKL5
KEY 1:
!?,.$:;*&”+-/<>=#%’1
KEY 6:
MNO6
KEY 2:
ABC2
KEY 7:
PQRS7
KEY 3:
DEF3
KEY 8:
TUV8
KEY 4:
GHI4
KEY 9:
WXYZ9
Pressing the * key will back space through
the message. Pressing the # key will save the
message.
6.9.2 Prize
The factory default is “0” for none. The
user can set the merchandiser to give away a free
product after a predetermined number of
successful vends. Enter the number of vends
between free vends, up to 9999. Setting the
number to “0” will disable the prize option.
6.9.3 Language
6.9.3.1 Primary
The user is presented with a menu of
available languages. The user may choose the
primary language for the display of all messages.
Note that Service Mode messages are available in
Primary language only.
6.9.3.2 Secondary
If desired, the user can select a
secondary language for the display of all
messages. Messages will be displayed first in the
primary language, then in the secondary
language.
6.9.3.3 Create
Custom
The user can create customized versions
of words or enter words in another language. For
convenience, the primary language messages can
be used as a starting point. The user can then
select words to modify. After creating the
customized messages, set the primary or
secondary language to CUSTOM.
6.9.4
Product Sensor
If set to “
Y
”, the merchandiser will use the
product sensor (optional) to determine if there is
product in the delivery bin. The control board will
not allow vending until any product in the delivery
bin is removed. A “REMOVE PRODUCT”
message will be displayed. This feature is used
primarily when vending glass bottles and products
that can be damaged by other falling products.
6.9.5 Speech
A speech synthesizer option is available for
use with RC Systems Inc. DoubleTalk LT speech
synthesizer. It operates only while the
merchandiser is in service mode. The speech
synthesizer vocalizes keystrokes and what is
shown on the display.
The Options menu selection 5 enters the
synthesizer on/off menu. Press 5 to toggle on/off.
Press # to exit to the Options Menu.
When turned on the synthesizer is inactive
until the merchandiser is placed into service
mode.
The synthesizer must be plugged into the
DEX plug on the control board. A utility cable
(AMS P/N 20786, Harness, Chip Programming)
may be used, but it must be plugged into a male-
to-male gender adapter (Radio Shack 26-231B)
followed by a null modem adapter (Radio Shack
26-264). The serial cable from the DoubleTalk LT
is plugged into the null modem adapter. The ¼”
jack from the utility cable is then plugged into the
DEX plug on the control board (other DEX
functions cannot be used while the DoubleTalk
LT is plugged in). A dedicated cable could also
be constructed.
6.10 SALES BLOCKING
Four separate time periods in each day of the
week can be set, during which selections can be
blocked (prevented from vending). All or any
combination of selections in the merchandiser can
be blocked from vending, or are exempt from
blocking (free to vend).
6.10.1
1-4 SET PERIODS
Содержание Sensit 3 39 VRM
