L0086, Rev. H
AMS SENSIT 3 GLASS FRONT VRM
1-4
1.3.8 Merchandiser Configurations
10 12 15 15 15
12 12 15 15 15
15 15 15 15 15 24 24 24 24 24
18 18 18 18 18 18 18 18 18 18
18 18 18 18 18 18 18 18 18 18
12 12 12 12 12
Figure 1.4 Example Configuration
The above drawing shows a configuration used
in an AMS 35 model merchandiser.
The top tray in the above example contains 5
columns, formed by the placement of dividers, with
motors and large diameter helices in place.
The pitch of the helices (the number of slots for
loading product) is given by the number. The size of the
square indicates the diameter of the helix (small or large).
All of the topmost tray helices shown above are
of large diameter, and are of 10, 12 and 15 pitch. The
configuration on this tray can hold 10+12+15+15+15 = 67
products.
All trays can be configured in this or another
configuration, depending on the products being vended.
Products which fit in the 10 pitch helix may be
too large to fit in the 15 pitch helix. The product must be
free to be pushed out of the column by the helix and fall
into the hopper.
The fifth tray down as shown in the above
example contains ten columns with small diameter
helices. The pitch is 18 for each column, so the
configuration on this tray can hold 18 x 10 = 180
products.
A good working configuration is one column with
a given helix (or dual helices) which easily vends a given
product. A record of working product configurations, as
shown in the example diagram, will greatly speed up new
set-ups or conversions.
With Sensit 3, extra wide product can be vended
using the following coupled motor feature.
1. With dividers form a column wide enough for the
product. When viewed from the front of the tray,
install a clockwise (CW) motor and helix on the right
side of the column, and a counter-clockwise (CCW)
motor and helix on the left side of the column. Note
that all normal or standard motors and helices turn
CCW to vend product.
2. The motors can be any distance apart. The helices
must be of the same pitch.
3. Using the configuration menu, couple the two motors
together. Refer to Section 6.7.7.
4. Install the product into the two helices. Change the
selection and price on the tray.
When this product is selected, the two helices will turn at
the same rate to vend the product.
1.3.9 Patent Disclosure
This merchandiser and/or certain of its
components are covered by one or more of
the following U.S. and International patents;
U.S. 6,041,962
6,145,699
6,202,888
6,384,402
6,520,373
6,708,079
6,794,634
7,191,915
7,343,220
7,446,302
7,742,837
Canada 2,329,314
Mexico 230714
Содержание Sensit 3 39 VRM
