Revision 1.10, 04-Mar-2010
Page 7 of 24
www.austriamicrosystems.com
Figure 7: AS5040 SSI tab after Zero Position progr amming
This example is the effect when the function Zero Position SET has been performed.
Before programming, the encoder shows the position 651 (Figure 6). One click on Zero Position Set makes the software
writing the value 651 into the OTP Zero Position register (not permanent programming).
Selecting Zero Position Reset will write the value 0 to the OTP Zero Position register.
Note:
The Zero Position function is the same for all the AS50xx, AS51xx, AS52xx rotary encoders offering this feature.
Selecting the OTP tab will read the OTP configuration from the IC.
ams
AG
Technical
content
still
valid
