SAFETY
G1
FATBOX
24
SAFETY
All specialist electronic devices must be operated with due care to avoid damage or injuries and
should be installed and operated by a trained personnel.
DO NOT OPERATE THIS EQUIPMENT IN ENVIRONMENTS CONTAINING POTENTIALLY EXPLOSIVE GASES
OR LIQUIDS, EXAMPLE, GAS STATIONS AND CHEMICAL PLANTS AND EXPLOSIVE STORES.
ALL CONDITIONS
Inadequate current or dips in voltage may cause the device to fail to connect to data services even
if the LEDs are lighted up.
Supply over 30 VDC will damage the device
POWER SET UP
Never remove or insert SIM card when device has PWR switched in “ON” position. Damage caused to
device or SIM in such case will not be warranted.
SIM CARD
Do not reboot/power-down the device until the writing process is acknowledged as completed.
CONFIGURING THE
ROUTER
!
