Amphenol
PCD
Shenzhen
Application Specification for
HVSL60061/HVSL630062/
HVSL280063
Doc. No.:
APCD-TD-282
Rev.: H
Page 11 of 29
Subject:
Application specification for
HVSL600061/HVSL630062/HVSL280063
ECN NO.:
C5467N
Eff. Date:: 2021-5-20
F-0866-B
3.8 Crimp the terminals as shown in the figure below.
3.9 Insert signal contacts into the housing and mount the plastic chock.
If no special requirements:
The cross-sectional acceptance criteria are in accordance with item
USCAR 21-4-2020. 85% to 80% compression ratio of the section is a
good place to start until there is no gap.
Orientate the contacts
end towards their slots.
Fold the wire in half while
keeping the contacts end
at the same level.
Insert signal contacts.
Section
Conductor visible
The housing
locks the
contacts spring
latches.
Insert plastic
chock.
Align the chock
with the
surface of the
insertion.
Orientate the
contacts end towards
their slots.
H
