PAGE 10
QP2000 | Quantum Series Power Amplifiers
Setting The Unit
2
4. INFO
Select Sub Menu 4
Output voltage from 100V line terminal
This menu provides information on
various parameters such as input and
output level.
For update Firmware to new version
Return to main menu.
5. SYSTEM
Select Sub Menu 5, press MENU to enter
Firmware version
This menu provides information such as
system firmware version and would
enable the unit to reset to factory setting,
erasing all previously set data.
For resetting the unit to factory default.
6. EXIT
Select Sub Menu 6, press MENU to enter
Use UP / DOWN button to toggle
between Yes and No and press MENU
button to exit.
Use this sub menu to exit setting mode.
For service purpose : the voltage prior to
step up transformer
Signal input value
Output value in dB
