TAP-EX3
USER’S GUIDE
10
10
Select a 2.4GHz Home Network to Extend
The Range Extender can extend a single 2.4GHz network, a
single 5GHz network or both (2.4GHz and 5GHz)
simultaneously. The wizard will walk you through the setup of
the 2.4GHz network first, and then the 5GHz network.
Select the Wi-Fi network that you wish to extend. Check that
your Wi-Fi Network has a signal strength of 70% or greater.
If you wish to only extend a 5GHz network and not a 2.4GHz
network, tap Skip to move on to the 5GHz network selection.
Otherwise, tap
Next
to continue.
If you fail to find any Wi-Fi networks, or your signal strength is below 70%, the Range Extender may be placed
too far from the Wi-Fi network that you are trying to extend. Move your Range Extender closer to the Wi-Fi
network that you are trying to extend and tap
Rescan
to scan again.
The Scan results page will display information regarding the name of the network (SSID), the channel which the
Wi-Fi network is operating on and the security type of the network. The results page will also display what the
signal strength is of every network detected.
