OPERATING INSTRUCTIONS
Automatic Charging
1. Connect the battery clips to the battery terminals. Red clip to the
positive terminal (+), and black clip to the negative terminal (-).
2. Plug the battery charger into the 120V AC outlet. Without any manual
selections, the smart charger will take about 30 seconds to automatically
identify and charge your battery with the optimal settings (2A & STD).
NOTE:
The battery charger has prior-setting memory function. If you have
already charged a battery before and have not reset new modes for a new
charging, it will automatically adopt your initial settings for the new charging.
Manual Charging
1. Connect the battery clips to the battery terminals. Red clip to the positive
terminal (+), and black clip to the negative terminal (-). Plug the battery
charger into the 120V AC outlet.
2. Select your desired charging rate, compatible battery and press "START"
button to start charging. All the data will be shown on the LCD screen.
3. During the charging, you can press "Recondition" button to check the
smart 8 charging stages. It will automatically switch back to the main
interface in 5 seconds.
4. If you would like to reset the charger during the charging, first press
"START" button to pause charging, reset your desired modes, and then
press "START" button again to continue charging.
5. The battery power percentage on LCD display will be 100% once your
battery is fully charged. Then the charger will auto-stop charging in this
case.
6. Regarding a long-term connection and charging, the smart charger will
auto-restart to pulse maintain battery to 100% full again when it detects
voltage dropping. Auto-stop charging when it is 100% full again.
