background image

LIMITED WARRANTY

Ampeak brand series products are covered with a 30-day hassle-free return 

and an 18-month replacement on Amazon (With no man-made damage). For 

the defects reported during the warranty period, Ampeak will repair or 

replace the defective parts or items after technical analysis and confirmation.

Ampeak shall not be liable for any incidental or consequential damages 

arising from the disassembling, misuse, or modification of the device. Some 

states do not allow limitations on how long an implied warranty lasts, so the 

above limitations may not apply to you.

The limited warranty is void under the following conditions:

Notice: All information in this manual is based on the latest information 

available at the time of publication and no warranty can be made for its 

accuracy or completeness. Ampeak reserves the right to make changes 

at any time without notice.

Abnormal charging current.

Disconnect the AC power 

supply of the charger, let 

the battery stand for a 

period of time and then 

charge it again. If the 

same error occurs again, 

replace the battery.

OVER 
CURRENT 
PROTECTION

Careless handling and violation of operation.

Misused, disassembled, altered, or repaired by unauthorized stores or 

technicians. 

3142026

Made in China

Содержание BC0253












Отзывы: