IMAC2B015 V2
Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version
Page 8 of 41
Ampcontrol Pty Ltd
– ABN 28 000 915 542
iMAC2 Controller EtherNet/IP Communications Manual
IMAC2B015 V2
– 07/17
A
P
P
R
OV
E
D
FOR
E
X
T
E
R
N
A
L
D
IS
TR
IB
U
T
ION
–
P
R
OP
E
R
T
Y
OF
A
M
P
C
ON
TR
OL
P
T
Y
LTD
–
N
O
T
T
O
B
E
R
E
P
R
OD
U
C
E
D
I
N
P
A
R
T
The iMAC2 Controller’s Ethernet port settings are not configurable via the HMI; they must be altered using
the iMAC2 Web Interface. The
Controller’s web server can be accessed using a one-to-one Ethernet
connection with an Ethernet enabled device. Temporarily configure your
device’s Ethernet port as follows:
Figure 3: Updating the Ethernet Port Settings of the Connectable Device
Once the network adaptor of the external device has been configured as shown in Figure 3, connect the
iMAC2 Controller
’s Ethernet port directly to your device’s Ethernet port, the iMAC2 Controller should then be
able to be pinged at 10.1.1.10. Once a successful ping has been performed, open a web browser (Chrome
recommended) and enter the iMAC2 Controller
’s IP address into the address bar:
http://10.1.1.10
; the
iMAC2 Controller web pages should load within a few seconds.
