IMAC2B015 V2
Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version
Page 7 of 41
Ampcontrol Pty Ltd
– ABN 28 000 915 542
iMAC2 Controller EtherNet/IP Communications Manual
IMAC2B015 V2
– 07/17
A
P
P
R
OV
E
D
FOR
E
X
T
E
R
N
A
L
D
IS
TR
IB
U
T
ION
–
P
R
OP
E
R
T
Y
OF
A
M
P
C
ON
TR
OL
P
T
Y
LTD
–
N
O
T
T
O
B
E
R
E
P
R
OD
U
C
E
D
I
N
P
A
R
T
Connecting to the Ethernet Port for the First Time
2.2
The iMAC2 Controller’s factory default Ethernet IPv4 settings are as follows:
Table 2: Default Ethernet Communications Port Settings
Default Ethernet IPv4 Settings
IP Address
10.1.1.10
Subnet Mask
255.255.255.0
If the Controller’s IPv4 settings have been changed, they can be restored to the factory default settings by
pressing the iMAC2 Controller’s Ethernet Reset button for 4 seconds (The internal iMAC2 Controller status
LED will turn on solid while the reset button is depressed, after 4 seconds the LED will change to a fast flash
to indicate settings have been reset to default, after which the button can then be released).
Figure 2: Location of Ethernet Reset Switch
Ethernet Reset
Switch
