4
BP868F / UME-07-REV.2-08B13
CAUTIONS FOR SAFETY
Measuring repeatedly can overstrain the user. Please wait at least 30 seconds after each
measurement.
Under normal operating condition, make sure the printer cover is closed.
Do not use this product together with other medical instruments.
In case the water gets into the product, pull out the power plug immediately and call the
service center.
2) Attention
①
During the Installation –
Do not use the product in an unstable place or a place where it can be adversely affected by
dust, vibration and shock.
Do not install or store the produce in a place that stores chemicals or generates gas.
②
About Power -
This product can be plugged into ordinary power outlet.
If the product is not going to be used for a long time, unplug the product.
If there are dust and alien substances on the plug pin and the connecting part, wipe them off
cleanly.
③
In Use –
When you turn on the power, it will inspect the system for 3 seconds. Do not shock the
product.
Always check there is no trouble with the product overall while in use.
When cleaning the product, use soft cloth. Never use organic solvent (acetone, thinner,
benzine, gasoline, etc.) or wet cloth. (However, in case the exterior of the product is
contaminated seriously, use isoprophyl alcohol and dry cloth to clean the product.)
If it makes strange sound, smell or smoke while in use unplug the machine immediately and
call the service center.
This product is designed for measuring blood pressure, not for treatment.