
11
BP868F / UME-07-REV.2-08B13
PREPARATION
5) Setting Initial Pressure Level
Press L/F button to change initial pressure level to
155mmHg-185mmHg~215mmHg~245mmHg and press SET button to set the pressure.
If you do not need additional settings, press the STOP button.
If you need to make additional settings such as date and time, press the SET button.
6) Setting Date and Time
Turn on the power. Start setting the date and time in the setup mode. Enter the setup mode.
•Open the print cover.
•Set date and time in the order of Year→Month→Date→Hour→Minute.
Setting Year
Press the SET button under the print cover and the 3rd digit
①
of the Year will flicker.
Press L/F button. Each time you press the button, the number
②
will change from 0~9.
If reach the number you want, press SET button
③
to set the value.
The first two digits of the Year will automatically change to 19 or
20 according to the digits you set.
When you press SET button, the 4th digit will begin to flicker.
④
Press L/F button to select the appropriate value and press SET
button to set.
(Note: The maximum value that can be set for the Year is 2099.)
Setting Month and Date
When you set the Year, the ‘Month· Date Setting’screen will
①
appear automatically. Press L/F button repeatedly to
switch numbers from 1~12, each representing the month.
When you reach the number you want, press SET button to set.
When you press SET button, the “Date” will start to flicker.
②
When you press L/F button, it will switch numbers from 0 to 3,
and press SET button to set the number you want. Select
the second digit of the date with L/F button and press SET
button to set.
Setting Time
When the month and date are set, the ‘Time Setting’screen will
①
appear.
Press L/F button to set the number from 1~12 and press SET
button to set. Check AM or PM.
The “Minute” will flicker automatically. Select the first digit
②
of the minute using L/F button and press SET button to set.
Select the second digit of the Minute with L/F button and
press SET button to set.
<Attention>
When you press STOP button while setting, the values will not
be stored. When you turn off the power, the date and time values
will remain for 60 days. However the time data can change if it
is not used for a long time (more than 60 days).