AMPall BP868F, Руководство по эксплуатации, Страница: 18 / 22

17 BP868F / UME-07-REV.2-08B13
TROUBLESHOOTING
3) Emergency Management
Problems Solutions
Nothing is shown on the
display
• Check the power cord.
• Check the fuse.
(Refer to page 2-1 when replacing the fuse.)
Pressure is not applied
• Check the mercury blood pressure monitor tube (CAL
terminal).
• Check whether there are alien substances between cuff and
cuff cover.
Voice is not heard
• Check whether the voice switch volume on the back is ON.
Printer
a. Nothing is printed
b. Paper is not out
c.
It does not print
automatically
• Check the surface and direction of the thermal paper.
• Check whether the lever on the left is pressed down.
Use the designated thermal paper.
• Open the printer cover and check whether the paper is stuck.
• Check whether the printer switch on the back is On.
Cuff is tight and is not
loosened
• Press the Emergency Stop switch on the front side.
• Check whether there are alien substances between cuff and
cuff cover.
The
measurements are
abnormal
• Check whether the installation location and peripheral
environment are appropriate for measurement. (Temperature
18
~23 ,
℃ ℃
humidity 60% or less)
Check whether the measuring posture is appropriate.
When the button is pressed,
the beep sound is heard but it
does not operate
• Check whether the coin is on or off.
Turn off the coin machine if it is not in use.
※
For other troubles, please contact our Customer Service Center or your retailer
.