En-1
2. ACCESSORIES
The following installation parts are supplied.
Use them as required.
Name and Shape
Q’ty
Application
Installation manual
1
This manual
Operating manual
1
Instruction book for operation
Receiver unit
1
For receiving the signal from the
remote controller
Cover
1
For covering receiver unit
Insulation
1
For protecting PCB from dust
Receiver unit wire A
5m
1
For connecting receiver unit wire B
to receiver unit
Receiver unit wire B
0.2m
1
For connecting receiver unit wire A
to PCB of indoor unit
Bracket (cover)
1
For fixing receiver unit to the wall or
ceiling
Screw (M3 x 12mm)
2
For installing remote controller
holder to the wall
Screw (M4 x 20mm)
2
For installing receiver unit to the
wall or ceiling
Remote
controller
1
For air conditioner operation
Battery (R03/LR03)
2
For remote controller
Remote
controller
holder
1
Use as remote controller holder
1. SAFETY PRECAUTIONS
Let the customer keep this installation manual because it is needed
•
when the air conditioner or receiver unit is serviced or moved.
WARNING
This mark indicates procedures which, if improperly
performed, might lead to the death or serious injury of
the user.
Never touch electrical components immediately after the power supply
•
has been turned off. Electrical shock may occur. After turning off
the power, always wait 5 minutes or more before touching electrical
components.
For the air conditioner to operate satisfactorily, install it as outlined in
•
this installation manual.
Installation work must be performed in accordance with national wiring
•
standards by authorized personnel only.
Do not cut, shorten, or extend the cable in the standard parts.
•
Do not turn on the power until all installation work is complete.
•
CAUTION
This mark indicates procedures which, if improperly
performed, might possibly result in personal harm to
the user, or damage to property.
Do not wire the receiver unit wire together with or parallel to the
•
connection cables, transmission cables, remote controller cables, bus
cable and power supply cables of the indoor and outdoor units. It may
cause erroneous operation.
Do not install the receiver unit cable near a source of electromagnetic
•
waves.
Do not install where there is the danger of combustible gas leakage.
•
Do not install near heat sources, steam.
•
Contents
1. SAFETY PRECAUTIONS .....................................................................1
2. ACCESSORIES ....................................................................................1
3. OPTIONAL PARTS................................................................................2
4. FUNCTIONS AND DIMENSIONS .........................................................2
5. SELECTING THE INSTALLATION LOCATION.....................................2
6. INSTALLING THE RECEIVER UNIT
6.1. Select the wiring pattern .................................................................3
6.2. Select the installation method ........................................................3
7. WIRING .................................................................................................3
8. TURNING ON THE POWER .................................................................4
9. SETTING THE REMOTE CONTROLLER
9.1. Load batteries (R03/LR03 × 2) .......................................................4
9.2. Installing the remote controller holder ............................................4
10. FUNCTION SETTING ...........................................................................4
11. SELECTING THE REMOTE CONTROLLER SIGNAL CODE ..............6
12. TEST OPERATION ...............................................................................6
13. ERROR CODES ...................................................................................7
9378626041-03_IM.indb 1
14/5/2555 9:07:10
AMP Air Conditioning
www.ampair.co.uk | [email protected]
