www.amp-research.com
8/10
IM77151 rev 01.13.20
A M P R E S E A R C H P O W E R S T E P
T M
– F O R D F 1 5 0
18
Remove drivers-door sill plate and pull back
carpet to reveal trigger wires threaded though
grommet.
Pull wires from grommet and route back along factory
wire harness to back door sill plate.
Locate the appropriate signal wires as noted below.
Note: There may be up to five Black with Blue Stripe
wires; use the one that looks unique (ie. different
blue stripe... weight and shade).
Remove rear door step plate and open wire bundle.
Route trigger wires to rear door sill plate.
6
6
SuperCrew
6
Black / Yellow
Black / Pink
Black / Blue
Black / White
Driver Front
Pass. Front
Driver Rear
Pass. Rear
21
Using supplied Posi-Taps™, splice Power Step trigger wires into the corresponding door ajar wires. The
SuperCrew (having 4 independent doors) is the only application that will use all four wires; tape off the two
unused trigger wires on the SuperCab and Regular Cab.
7
6
Insert
Tighten
Strip 3/8”
Insert and
Tighten
17
22
19
22
20
