User Manual for
AML Oceanographic’s
Plus
X
18
•
Ensure that the O-ring and O-ring surface are free from dirt and debris.
•
Slide the battery pack into the pressure case.
•
Install the retaining ring.
Charging Ni-Cad Batteries:
Refer to the wiring diagram in the appendix, and perform the following steps:
•
Ensure the instrument is dry.
•
To avoid possible combustible gas build-up inside the instrument case, open the battery
compartment prior to charging the batteries.
o
Unscrew the retaining ring on the shackle end cap.
o
Grasp the shackle bar and wiggle the endcap off the pressure case, opening the
case by at least 3 cm.
•
Plug the battery charging cable into the instrument.
•
Plug the charger into the charging cable.
•
Plug the charger into a 120 or 240 volt AC outlet.
•
Turn the charger on with the power switch on the charger. The fast charge indicator light will
turn on indicating the batteries are being charged.
•
Allow the batteries to charge until the fast charge light on the charger turns off. A full charge
requires approximately 6 hours.
