Amity Technology Crop Chaser 1000, Руководство по эксплуатации

Страница: 25 / 43

6 - 2
6.3 Unloading the Cart
WARNING: Be sure that there are no
bystanders near the cart before starting to
unload and that no one approaches the cart
during the unloading process.
CAUTION: Always position the cart on level
ground when unloading.
1. Position the cart parallel to the receiving
unit (a truck, for example). The distance
between the lip (1) of the cart and the top
edge (2) of the receiving unit should be 24
to 36 inches (60
- 90 cm).
NOTE: The distance is determined by the
height of the receiving unit. If the unit is lower
than the cart the distance could be 24 inches
(60 cm). If the receiving unit is taller than the
cart, the cart tank will move 8 inches (30) cm
closer for every 24 inches (60) cm the tank is
raised.
The distance between the cart and the unit to
be loaded may vary with the type of product
being unloaded from the cart. The first time
the cart is unloaded, be very careful to see
how the product pours from the cart into the
receiving unit. This will provide a reference for
the distance between the cart and the
receiving unit.
Figure 6 - 2: Tank Distance from Receiving Unit
Figure 6 - 3: Raising Tank
2. Position the cart front to back to be sure the contents of the tank will flow entirely into the
receiving unit.
3. Raise the front of the tank until the lip (1) is about 36 inches (90 cm) above the receiving unit (2).
2
2
1
1