Amity Technology Crop Chaser 1000, Руководство по эксплуатации

Страница: 43 / 43

9 - 1
9.0 STORAGE
9.1 End of The Season
1. Thoroughly clean the cart inside and out. Debris and dirt will draw and hold moisture and cause
rust.
2. Inspect the cart for any damaged or worn components, repair or replace as required.
3. Paint any surfaces that have exposed bare metal to prevent rusting.
4. Inspect all hydraulic hoses and components for leaks and repair immediately.
5. Move the cart to a level, dry and clean area.
6. Remove all eight tank drain plugs and store with the cart.
7. Put blocking material under the hitch of lower the hitch so the cart is supported by the hitch jack
and blocking material.
9.2 Beginning of The Season
1. Review the Operator ’ s Manual before field operations.
2. Check the cart for any loose or damaged components. Tighten any components including guards
and shields.
3. Install the eight drain plugs.
IMPORTANT: All components that are damaged or worn must be repaired or replaced before
operating the cart. See the Parts Book for part numbers.
4. Attach the cart to the tractor hydraulics.
5. Lower the hitch jack until the blocking can be removed.
6. Connect the cart to the tractor hitch.
7. Stop the engine and place the tractor in PARK.
8. Lubricate the entire cart to force out any moisture that accumulated while in storage.
9. Run the cart to ensure proper function.