Amit IOG761 Скачать руководство пользователя страница 124

Страница: 124 / 395

Industry Cellular Gateway

Mask

1. A Must filled setting
2.

255.255.255.255(/32)

selected by default

Enter the required subnet mask if

Source IP

is specified above.

It can be a single IP with 255.255.255.255 (/32) subnet mask, or an IP group
limited with proper subnet setting.

Mapping Destination

IP/Domain Name

1. A Must filled setting
2.

is selected by default

Specify the expected real target IP /

Domain Name

that will be used to

replace the original one that is issued by the hosts behind the NAT gateway.

Mask

1. A Must filled setting
2.

255.255.255.255(/32)

selected by default

Enter the required subnet mask if

Destination IP

is specified above.

It can be a single IP with 255.255.255.255 (/32) subnet mask, or an IP group
limited with proper subnet setting.

Physical Interface

1. A Must filled setting
2.

All

is selected by default

Specify the interface to apply the translation rule. The enabled WAN
Interface will be available in the dropdown list.
By default,

All

is selected, and the translation rule will be applied to the

traffics passing through all WAN interfaces.

Description

An optional setting.

Specify a brief description or rule name for this IP Translation rule.

Enable

The box is unchecked by
default

Check the

Enable

box to activate the translation rule.

Save

N/A

Click the

Save

button to save the settings.

Undo

N/A

Click the

Undo

button to cancel the settings

124

Содержание IOG761












































































































































































































































































































































































































Результаты поиска

Содержание IOG761

Отзывы:

Бренды по названию

Популярные бренды

Amit IOG761, Руководство пользователя

Результаты поиска

Содержание IOG761

Отзывы:

Бренды по названию

Популярные бренды