8
Connection
Wiring the speaker connectors
The speaker connectors are supplied
packed separately with the APU-RSi(C)
to simplify the fitting of cables from each
amplifier and speaker channel.
• Strip each cable back by 6-8mm and
twist the wire ends.
• Identify the polarity of the cable.
The + cable is usually marked with a
stripe or a rib.
Stripe
Rib
The + cable must be connected only
to + terminals throughout the system
(at the APU-RS, the amplifier and the
speaker).
• Unscrew the cable fixing screws.
• Pass the speaker cable into the
terminal openings.
To maintain polarity the + cable must
always be connected to the LEFT
terminal.
• Tighten the fixing screws to secure
the cable.
Fitting the connectors
• Each connector can now be fitted by
pressing it into the opening on the
back of the APU-RSi(C).
The slot in the connector should
engage with the edge of the PCB inside
the opening.
