Amina APU-RS16i Скачать руководство пользователя страница 10

Troubleshooting

Symptom

Solution

No sound from one 
or more channels

Check that the sound source and all of the system amplifiers 
are switched on.
If the problem persists, switch off the system and check that 
the connections to each channel have been correctly and 
securely made. Ensure that there are no whiskers of wire 
touching at the connectors and causing the signal to short-
circuit.

Volume reduces 
periodically in one or 
more of the speakers

This may be due to over-driving. If so, reduce the volume. 
Never overdrive the system intentionally.
There may be too much plaster over the speakers.

If you cannot resolve the problem, contact your supplier.

Specifications

Dimensions:  

1U height front panel, 482mm x 44.4mm (19” x 1 

3

/

4

”), 

case depth, 213mm (8 

3

/

8

”)

Weight: 

3.14kg (6lbs 14oz) Nett, 3.68kg (8lbs 2oz) Gross

Fuse protection: 

Self-resetting, current sensing type. Fuse threshold 
set via internal jumpers

Compatibility APU-RS8i/16i           Suitable for use with Amina MobiusDual; Mobius5; iQ1; 

iQ2; iQ3; AIW350iN-S200 only (legacy speakers may 
be supported, contact your supplier for information)

Compability APU-RS8iC/16iC 

Suitable for use with Amina Edge5; Edge7; Mobius7

Number of channels:  

8 or 16

Connection type: 

Screw terminals

Maintenance requirements: 

Protection fuses can be set by installer if necessary.*

*Repeated tripping of fuses may require fuse replacement by the manufacturer to 
ensure optimal speaker performance

Warranty

The APU-RSi and APU-RSiC are designed to operate reliably for many years. Correctly 
installed and operated in accordance with these instructions, Amina warranties the 
APU-RS against defective materials and workmanship for a period of ten years.

Содержание APU-RS16i













Отзывы: