4
Caution: Read
before installing
these products
• To ensure optimal performance,
please read this guide carefully. Keep
it in a safe place for future reference.
• Install this product in a cool, dry
and clean place - away from direct
sunlight, heat sources, vibration, dust
and moisture.
• Do not expose this unit to sudden
temperature changes or locate it in
an environment with high humidity.
This is to prevent condensation
forming inside which may cause
damage to this unit and possibly to
devices connected to it.
• Do not clean this unit with chemical
solvents as this might damage the
finish. Use a clean, dry or damp cloth.
• Do not attempt to modify or repair
this unit.
• Be sure that all connections are made
in accordance with this guide
• Contact your distributor or the
manufacturer if a fault should occur.
• This unit features internal jumpers
that may be adjusted by the installer.
Take care when removing and re-
fitting the lid not to damage the four
machine screws. Ensure the screws
are tight when re-fitting them.
• This product does not require any
power connection. Never attempt to
connect mains or any other power
source to it.
Introduction
Compatibility
The APU-RS8i and APU-RS16i has been
designed specifically to enhance the
sound and reliability of Mobius Series
and iQ Series loudspeakers.
The APU-RS8iC and APU-RS16iC are to
be used exclusivly for the Edge Series
and the Mobius7. The installation of the
different rackmount-models is the same.
Compatible models are listed in this
table -
Model
Compatible Speakers
APU-RSi 8/16
iQ1, iQ2, iQ3,
AIW350iN-S200,
MobiusDual, Mobius5
APU-RSiC 8/16
Edge5, Edge7, Mobius7
The APU-RSi(C) features a separate high-
pass filter and a current sensing
re-settable fuse to protect each
loudspeaker from being over-driven and
potentially damaged.
If the APU-RSi(C) senses excessive drive
current from the system’s amplifier it
will automatically reduce the sound level
from the speaker until the amplifier’s
volume is reduced.
NOTE: APU-RSi(C) is not suitable
for 100v/70v line systems
(high impedance/fixed
voltage), subwoofers or other
manufacturers’ loudspeakers.
