7
Connection
Connection cautions
• NEVER connect more than one
loudspeaker to an output channel.
• It is not recommended to connect
amplifiers with power outputs that
are far greater than the loudspeaker’s
peak power rating.
Wiring diagram
The diagram below shows an example of
the wiring for channels 1 and 2.
Each channel of the amplifier is wired
to the ‘AMP’ terminals of one of the APU-
RSi(C) channels.
The corresponding speaker is wired to
the ‘SPK’ terminals of the same channel.
NOTE: The + terminals of the amplifiers
and speakers must connect to the
+ terminals of the APU-RSi(C) to
maintain correct polarity all the
way from amplifier to speaker.
Amplifier
Channel 2
Channel 1
AMP SPK
CH1
AMP SPK
CH2
AMP SPK
CH3
AMP SPK
CH4
AMP SPK
CH5
AMP SPK
CH6
AMP SPK
CH7
AMP SPK
CH8
AMP SPK
CH9
AMP SPK
CH10
AMP SPK
CH11
AMP SPK
CH12
AMP SPK
CH13
AMP SPK
CH14
AMP SPK
CH15
AMP SPK
CH16
Edge,
Mobius or IQ
series
loudspeaker
Edge,
Mobius or IQ
series
loudspeaker
