AMIMON AMN12310 WHDI, Техническое описание

Страница: 32 / 39

Design Guidelines
Version 0.5
AMIMON Confidential 32
Chapter 6
Design Guidelines
6.1 Digital Layout Recommendation
To better understand the layout guidelines, please refer to the AMN12310 Schematics which are part of the HDK
package.
6.1.1 Stack Up
Recommended stack up for six layers design:
•
Total thickness: 1.15mm
•
Tolerance thickness: 10%
Table 14: Digital Layout Recommendation
Lay.
No.
Layer Name
Layer
Stack-up
Unit Control Impedance/Notes
1 Component side
(CS) 1-1.5 oz 1) Trace Width -14mil, Separation -12 mil (to ground plane) - 50 OHM COPLANAR.
2) Trace Width - 5.5 mil, Separation between differential lines – 5.5 mil, differential impedance -
103 OHM.
3) Trace Width – 5 mil, Separation between differential lines – 6 mil, differential impedance -
107 OHM.
Space 8.6 mil
2 Ground 2 oz
Space 4 mil
3 Ground 2 oz
Space 4 mil
4 Power / Ground 2 oz
Space 4 mil
5 Ground 2 oz
Space 8.6 mil
6 Print Side (PS) 1-1.5 oz Trace Width - 5mil, Separation between differential lines – 6 mil, differential impedance - 107
OHM.
Board Thickness 1.15 MM +/- 10%
Material FR4 HITG