Amigo Lift-All, Руководство пользователя

Страница: 10 / 24

3) swing the boom out until the boom outer end is over the lift arm attached to your seat post. Push DOwn on
the electrical switch located at the boom outer end to lower the
s-hook. attach the s-hook to the adjustment spacer (figure 7a,
no. 2) on the lift arm. Make sure the lift strap webbing is straight
and not twisted (figure 9).
4) Press uP on the electrical switch until your POV wheels clear the
top edge of the trunk opening. steady the POV with your hand as it is
lifted.
while lifting your POV, make certain that your hands are clear of
the s-hook. Make sure the top of the s-hook does not go past the
bottom of the strap enclosure and that the s-hook is completely
engaged in the bar.
5) slowly swing the boom toward the side of the trunk and turn
the suspended POV so it will clear the sides of the trunk.
6) Press DOwn on the electrical switch and slowly lower
your POV onto the floor of the trunk guiding it with your
other hand (figure 10).
7) remove the s-hook from the lift arm on your POV’s seat post.
lift up the outer end of the boom and unlatch the s-hook from
the boom inner end.
8) lower the boom to a horizontal position and reattach the
shock cord hook.
9) Place the seat and other components of your POV in the
trunk and carefully close the lid.
tO unlOaD yOur POV, reVerse abOVe PrOceDures.
10 www.myamigo.com