Amico A3P-SENS-L-GAS, Руководство по эксплуатации и техническому обслуживанию

Страница: 12 / 36

12 Amico Corporation
NETWORK SETUP
CAUTION:
Have the information systems personal set up the network interface. Before making any
changes to the network setting notify information systems personals.
Equipment Needed to Setup the Network
• PC with Ethernet connection
• PC with web browser, (Internet Explorer, Google chrome)
• Cat 5 Ethernet cable ( Straight-Through)
• SD Card
Setup
• Connect Alert-4 Area alarm to an Ethernet switch using a cat 5 Ethernet cable
• For direct connection to PC, connect the Area alarm to PC using cat-5 Ethernet cable
NOTE : It is best to use a switch instead of a hub because the device communicates at 10 Mbps. A switch is better able
to support this speed, improves network performance and keeps unnecessary traffic from being routed to the alarm.
• Amico Alert-4 Area alarm will be set to factory default setting, the IP Address, Subnet Mask and Gateway
as following:
IP address: 192.168.1.100
Gateway: 192.168.1.1
Subnet Mask: 255.255.255.0
• Static IP configuration needs to used to connect to the Hospital Network
• Upon power-up, the device will immediately begin using the static IP configuration
• Verify the green “LINK” LED illuminates at the Ethernet Port
A m i c o M i c r o p r o c e s s o r B a s e d A l a r m
P a g e : 4
USER RESPONSIBILITY
The information contained in this Installation and Operation Maintenance
Manual, pertains only to the ALERT-2 microprocessor based digital alarm.
This product will perform to conformity with the descriptions contained in this
manual, when assembled, operated, maintained and serviced in accordance
with the installation instructions provided.
The alarm
must be checked periodically. Parts that are broken, missing,
worn, distorted or contaminated, must be replaced immediately. Should such
repair or replacement become necessary, please contact Amico Corporation
or their distributors.
All alarms should not be repaired, or altered without prior written or verbal
approval of Amico Corporation or it’s distributors. Failure to comply will void
all warranty on the alarm.
Statements in this manual preceded by the words
WARNING
,
CAUTION
,
DANGER and
NOTE
are of special significance. Please read these sections
carefully.
WARNING:
denotes steps which can prevent injury.
CAUTION:
denotes steps which can prevent damage to equipment.
DANGER:
denotes steps which can prevent electrical shock to equipment
or to prevent serious injury and/or death.
Configuration Guide