Amico A3P-SENS-L-GAS, Руководство по эксплуатации и техническому обслуживанию

Страница: 14 / 36

14 Amico Corporation
To load the channel name configuration file and the network configuration file, press and hold the Reset button
and the Setup button at the same time for two seconds; then let go of the Reset button while still holding down the
Setup button, until the new channel name configuration file and network configuration file are uploaded to the Area
Alarm.
If the configured information does not appear on the screen, repeat the steps above. If the problem persists, contact
Amico Corporation for further assistance.
• Once the information is visible on the LCD Alarm screen, leave the SD Card in the slot for approximately
1 minute in order for the information to be completely uploaded onto the alarm, and then proceed to
remove the card.
• Once the card has been removed, restart the LCD Alarm to ensure that the configured network setting
have been saved onto the LCD Alarm.
BUILD DATE: OCT 24 2014
BUILD VERSION: 1515
GATEWAY: 192.168.1.1
MASK: 255.255.255.0
IP ADDRESS: 192.168.1.100
Configuration Guide