13
After the work end time is reached, the oven
will turn off automatically, the sound signal will
turn on and the lamp at will flash again,
•
set up the oven function and tem-
perature control knobs in turn-off
positions,
•
press buttons
1
,
2
or
3
to turn the
signal off; the lamp will go out, and
the display will indicate the current
time.
Notice!
You can check and correct programmed
set-ups at any time. You can not, however,
change the current time set-ups when the
programmer is in the semi-automatic or au-
tomatic operations.
SETTING UP POWER SAVING MODE
Programmer has a power saving function.
This function allows for blanking the display
while the programmer is showing current
time. After the display is blanked, the pro-
grammer is still measuring current time.
How to activate this function:
-
Simultaneously press any two but-
tons
1
,
2
or
3
and hold for about 3
seconds, the display will go out.
How to deactivate this function:
-
Press any button
1
,
2
or
3
, the dis-
play will show current time.
Notice!
The saving mode function cannot be used if
the timer has been set or if the programmer is
in semi-automatic or automatic mode.
OPERATION
2
1
3