amiad AMF-370K-S, Инструкция по установке и эксплуатации

Страница: 84 / 86

AMF 370K -S 02.2018 Page 84 of 86

Check the stainless steel cylinder and replace if worn.

Replace the piston’s U-rings.
Piston #76:

Carefully check the piston, replace any worn part.

Check and replace the bearing guides and the pin wear plates.

Check the spraying nozzles for clogging, clean or replace accordingly.

Check the spraying nozzles for wear and tear, replace if necessary.

Check the spraying system for loosen parts or too large tolerances, correct accordingly.

Replace the tail pipe U-ring seal assembly.
Cartridges:

Check the cartridges for wear and tear. If necessary replace the shaft bearing.

Carefully check all the cassettes. If worn cassettes are found call Amiad technician for replacing the worn
cassettes. (This operation should be done only by authorized Amiad technician.)

Check the partition end bearings at the end of the cartridges and replace if necessary.

Replace the partition plates U-rings and O-rings.

Check the stop ring of brake and replace if worn.

Check the gear wheel and replace if worn.
Index Piston:

Carefully check the piston, replace any worn part.

Replace the cylinder U-rings and guide strips.

Replace the shaft U-rings

Tighten the shaft/connector.
The drive mechanism:

Check the push blocks and spring guides for free movement and tolerance, correct if necessary.

Tighten all the bolts of this mechanism.
The tail assembly:

Check the tail pipe assembly for wear and tear, correct if necessary.
Auxiliary subsystem:

Check and maintain the auxiliary subsystem components; pumps, valves, solenoids, etc. according to their
manufacturer instructions.
6.3. Parts schedule and drawings
The following pages include the 4x4 STD AMF370-illustrated parts list.pdf document that present the filter’s parts
schedule and drawings.