amiad AMF-370K-S, Инструкция по установке и эксплуатации

Страница: 49 / 86

AMF 370K -S 02.2018 Page 49 of 86
Filter Setup Screen
This screen allows the operator to set:
Filter Type – This filed must be AMF 370K .
Number of Piston Steps – The user may set the
number of piston strokes per flushing cycle. For
normal operation of the filter this parameter
must be
36.
Disable Mode Operation – Select the behavior type
of the system when the filter is set to disabled mode.
The options are: close the Inlet & Outlet valves or
leave them opened.
Back-flush Line-flow Signal - Set the type of the no
flow sensor of the flush line. The options are Digital
or Analog.
Continue Filtering during fault - Select the system
behavior during fault; stop filtering or continue.
AMF 1 Configuration - select the type of the system's
control board. In this project this field Must be
Combined IO .
Close Inlet Valve While not Filtering - Select the
behavior of the Inlet valve while not filtering; close
the valve or leave it opened.
Language setting Screen
This screen allows the operator to select the desired
user interface language.
Please see the language selection chapter of this
document 3.7 for details.