AMGO 409-HP, Инструкция по установке и обслуживанию

Страница: 5 / 41

3
Specifications of concrete must be adhered to the specification as following.
Failure to do so may result in lift and/or vehicle falling.
1. Concrete must be thickness 4” minimum and without reinforcing steel bars, and
must be dried completely before the installation.
2. Concrete must be in good condition and must be of test strength 3,000psi
(210kg/cm²) minimum.
3. Floors must be level and no cracks.
C. POWER SUPPLY
The electrical source must be 2.0HP minimum. The source cable size must be
2.5mm² and in good condition of contacting with floor.
III. STEPS OF INSTALLATION
A. Check the parts before assembly
1. Packaged lift and Hydraulic Power Unit
(See Fig. 4)
.
2. Open the outer packing carefully, check the parts according to the shipment list.
(See Fig. 5)
.
Fig. 4
Fig. 3
Concrete must be of 3,000psi ( 210 kg/cm²)
minimum.