Seite 8 von 19
AMG Sicherheitstechnik GmbH
Industrial Park Road A-9
39245 Gommern
Phone 039200-7797-0
Freecall 0800-2264264*
Fax 039200-7797-29
www.amg-sicherheitstechnik.de
Business hours are 8-17 clock, outside this time an answering machine is switched
*) free of charge from the German fixed network and all German mobile networks
To enable or disable motion detection for each channel, select the camera in the main
menu (Channel Settings
Motion Detect). In this menu, please only change the entry
"Detection" if necessary. There are three different modes available here. By default, the
entry "Motion" should be set, this activates motion detection. Furthermore available are
"alarm input" and "video loss". If you want to turn off motion detection, you should
switch to Video Loss. With the button "Copy" you can accept the settings for all cameras
and do not have to configure each camera separately.
In the menu "Network settings" you can edit the network settings as described in step 6.
If you want to make the recorder available for the Internet, you have to check "DHCP or
P2P". Further settings for the menus "DDNS", "FTP", "PPPoE Ben.", "3G", "E-mail", "Wifi
Setup" are not necessary for the operation of the recorder and should under no
circumstances be changed.
We recommend that you do not change the default settings!
Note to FTP setting:
There is no general installation path for setting up the FTP access because it depends on
the particular device. For a proper setting of the FTP access, we therefore recommend to
get a specialist on site with good network knowledge.
If the cameras are set for motion detection and
should fire in the rain, lower the sensitivity.
